Storm Water Drains & Catchment Pits

When was the last time you HAD YOUR SYSTEM
CLEANED OUT?

You would be amazed how much dirt and sand a storm/wastewater drainage system can collect in a short period of time.

We have a client where we remove 15 tonnes of sand/silt a month from one large catchment chamber that is only a part of their entire waste/storm water drainage system. If they didn’t get someone to clean out this chamber regularly, they know that they would be introducing 15 tonnes of sand/silt into their drainage system every month!

It wouldn’t take long for their drains and entire system to fill up. The system would progressively reduce its ability to handle their wastewater flow, until their drainage system would fail, resulting in flooding on site, the possible temporary closure of their operation and all the unnecessary disruption and inconvenience this would cause.

When this happens they would not only need a liquids waste disposal contractor to empty out all their catchment chambers, but also a water jetting company to unblock and clear all their drains.

If their system requires pumps to finally discharge their wastewater, they have also run the risk of damaging their pumps and filling their pump chambers, which will require further cleaning and removal of more sand/silt.

It’s a lot cheaper to have a programmed maintenance cleaning procedure in place to ensure your entire waste/stormwater system remains clean and can operate at full capacity and thereby eliminating the risk of any disruption.

Contact Us to enquire about getting your Storm Water Drains or Catchment Pits cleaned.